Terminal Busbars

Whether you need to connect a few high amperage cables, or many low amperage connections in a fast-paced production environment, VTE has a device to fit your application. Ranging from 3 up to 30 connection points, and capable of handling up to 750 amps, you're sure to find a solution to fit your needs.

3 Point Hi Amp Busbar

Designed for high current draw devices, primarily in the marine industry. Connect single large capacity cable to 2 devices, such as bow thrusters or other high draw devices. Can be used with a protective cover, to meet industry safety regulations.

4 Point Terminal Busbar

Our original 4 point connection busbar, this busbar connects multiple suppy lines to a single source cable. A low cost solution to many current distribution applications. Can be used with a protective cover to protect against accidental shorts.

Large 4 Point Terminal Busbar

Designed as 'one half' of our dual 4 point busbar. Beefy and robust, the large 4 point busbar handles heavy cabling and high current, for heavy duty applications.

10 Point Terminal Busbar

Low-cost and flexible, the 10 point terminal busbar offers (10) 15amp connections, with (2) 1/4" connection posts. The 10 point busbar can be used with a cover, protecting the connection points and complying with industry safety requirements.

12 Point Terminal Busbar

Low-cost and flexible, the 12 point terminal busbar offers (12) 15amp connections, with a single 1/4" connection post. The 12 point busbar can be used with a cover, protecting the connection points and complying with industry safety requirements.

Dual 4 Point Terminal Busbar

Our most versatile busbar, the dual 4 point offers (4) high current connections, as well as (3) lower current connections on each side. The positive side has a red sticker and red markings on each post to indicate positive polarity. The dual 4 point busbar can be outfitted with a protective cover, protecting connection points and complying with industry standards.

Tab Type Terminal Busbar

The Tab-Type Busbar is our solution for fast production times. Each 10 point layer ( up to 3 ) has push on quick disconnect terminal positions. These push-on terminals can improve production installation times by as much as 340% over ring type terminals.